Trusted Gas Connections for Your Pool & Spa Heater
Gas Heating Connections for Pools & Spas in Prince George, BC
Heating your pool or spa efficiently requires professional gas line installation and connection. Our Certified Gas Contractors bring 15+ years of experience to every pool and spa heating project in Prince George and the surrounding areas. We handle everything from new installations to system upgrades, ensuring your connections meet Technical Safety BC standards and deliver reliable warmth all season long.
Why It Matters
Why Choose Us for Pool & Spa Heater Connections
Certified Gas Contractors
Our team holds the credentials to design, install, and pressure-test gas connections for pool and spa heating systems across Prince George and the broader region. Every installation meets Technical Safety BC regulations and is backed by our commitment to safety and precision. Certification means we’ve passed rigorous training on gas safety codes, leak detection, and emergency procedures.
Specialist in Connection Design
Pool and spa heaters demand precise gas line sizing and routing. We assess your equipment, the distance from your main gas service, and local code requirements to design a system that operates efficiently without compromising safety. No guesswork, just engineering. We calculate the exact gas volume your heater requires, account for pressure drops over distance, and specify the right regulator to maintain stable performance.
15+ Years of Heating System Experience
We’ve installed and serviced residential and commercial heating systems for more than a decade. Pool and spa heating sits at the intersection of HVAC knowledge and gas-fitting expertise—a combination that matters when every connection counts. That experience means we’ve solved problems others haven’t encountered and can adapt quickly when site conditions are unexpected.
FortisBC Trade Ally & Technical Safety BC Compliance
We maintain active standing with FortisBC and coordinate seamlessly with the utility on gas service extensions or upgrades. When permits are needed, we handle the paperwork and inspections with Technical Safety BC directly. Our established relationship with the utility means faster approvals and fewer delays on your project timeline.
Pressure Testing & Final Inspection Included
Every connection is pressure-tested to confirm integrity and safety before handoff. We provide detailed test reports and walk you through system operation, so you understand what we installed and how to maintain it. Testing protocols exceed code minimums, so you get extra confidence your system will operate safely for years.
Family-Owned & Local
As a locally-owned, family-operated company based right here in Prince George, we stand behind every connection we make. Your heating comfort is part of the community we serve year-round. We’re invested in your long-term satisfaction because we live here too.
Next Step
Ready to Upgrade or Install Your Pool & Spa Heater Connection?
Get started with an upfront assessment from our team. We'll evaluate your space, discuss your heating goals, and provide a detailed plan with cost breakdown and timeline. Whether you're adding a heater to an existing pool, upgrading an old connection to match newer equipment, or winterizing your system for seasonal closure, we'll design a solution built to perform in Prince George's climate and backed by our 15+ years of heating expertise. No hidden costs, no surprises—just professional gas-fitting from a Certified Gas Contractor.
Request Your Assessment
Our Process
Our Pool & Spa Heater Connection Process
1. Initial Assessment & Site Evaluation
We start by understanding your pool or spa setup and your heating goals. Our team inspects the equipment location, measures the distance from your main gas service, and identifies any obstacles or local code requirements that affect the installation plan. We also discuss BTU requirements and confirm the heater is sized appropriately for your space. This phase sets the foundation for a safe, efficient connection that will serve your heating needs for years.
-
Examine current gas infrastructure on your property, including existing service line size, pressure, and condition -
Review the pool or spa heater specifications, BTU needs, and manufacturer-recommended gas pressure and volume -
Assess terrain, distance, and routing options for new lines, accounting for frost depth and underground obstacles -
Confirm compliance with Technical Safety BC standards for residential and commercial pools, as well as any municipal bylaws -
Discuss any permits required for gas service extensions or upgrades, including estimated timelines -
Review your pool's year-round use and heating schedule to determine if seasonal shutdown procedures apply -
Identify potential safety hazards, such as areas exposed to weather, traffic, or accidental damage
2. Design & Permitting
Using the site information, we design the gas line route and sizing. If a new service line is needed or if the project requires a Technical Safety BC permit, we prepare all necessary documentation and coordinate with the utility and inspection authorities. We communicate the plan to you, including timelines and any access requirements. This is where engineering precision ensures your system operates reliably without wasteful oversizing or dangerous undersizing.
-
Calculate proper gas line diameter and material (typically 1/2" to 1" copper or steel tubing) based on BTU load and distance from the service point -
Prepare permit applications if required (new service, pressure upgrades, commercial pools), including design drawings and pressure calculations -
Obtain Technical Safety BC pre-inspection approval where needed, which typically takes 1–2 weeks -
Schedule utility coordination with FortisBC for any main-line work, including locates and potential service line extensions -
Confirm installation timeline with you in writing, accounting for permit approval time and any utility dependencies -
Specify all regulators, shutoff valves, and safety equipment appropriate to your heater and local code -
Provide you with a preliminary cost estimate and detailed scope of work before equipment ordering
3. Installation & Connection
Our Journeyman Sheet Metal Workers execute the installation with precision. We run the gas line from the service point to the heater, install all necessary fittings and shutoff valves, and ensure the heater is connected according to manufacturer specifications. Every fitting is checked for tight seals and proper orientation. This phase is where our expertise and attention to detail protect your investment and your family's safety.
-
Lay out gas line route with minimal exposure and maximum protection from weather and damage, using UV-resistant conduit where exposed above ground -
Install rigid copper tubing for exposed runs (durable and safe) or HDPE (high-density polyethylene) for underground burial, with protective sleeving at transition points -
Fit shutoff valves at the heater inlet and anywhere a section can be isolated for future service or winterization -
Install pressure-regulating equipment (primary regulator at the service point, secondary regulator if needed at the heater) -
Connect heater inlet fittings and test all connection points for proper torque (over-tightening risks damage; under-tightening risks leaks) -
Install test ports on both sides of the regulator for future safety inspections and pressure verification -
Ensure labeling and access for future maintenance, with clear identification of shutoff valve locations and emergency contact information -
Bury underground lines at minimum depth per Technical Safety BC standards, and install marker tape above buried lines for safety
4. Pressure Testing & Commissioning
Before the heater fires up, we perform a full system pressure test to 10 PSI (or per Technical Safety BC requirements). We check every connection for leaks, confirm proper gas flow, and document results in a detailed test report. Once testing passes, we commission the heater and walk you through startup, operation, and basic maintenance. This is the critical safety gate—no heater fires until we have proof the system is secure.
-
Execute standing pressure test at required PSI (typically 10 PSI for residential, higher for commercial) for the minimum hold time specified by code -
Inspect all fittings and joints with electronic leak detection equipment (ultrasonic or soap-bubble methods for larger leaks) -
Document test results including initial pressure, hold time, final pressure, and any leaks found and corrected, with photos -
Attach test report to permit completion certificate for Technical Safety BC and your records -
Light the pilot and verify flame color (should be blue with slight yellow at the tip), ignition sequence, and response to thermostat -
Test heater shutoff and confirm safety shutoff mechanisms work as designed (flame sensor test, thermostat response, manual shutoff) -
Verify gas pressure at the heater is within the manufacturer's specification (typically 4–7 IWC for residential) -
Provide you with a complete copy of all test reports, permits, installation checklist, and heater documentation for your records
5. Handoff & Ongoing Support
You receive a complete set of documentation: the permit completion certificate, pressure-test reports, heater commissioning checklist, and recommended maintenance intervals. We explain any special shutdown procedures if you winterize the pool or take the system offline seasonally. Ongoing service calls and maintenance are just a phone call away. This handoff marks the start of a long, reliable relationship between you and your heating system.
-
Hand over all permits, inspection certificates, test documentation, and manufacturer literature for your heater -
Explain winterization procedures if applicable (draining, shutoff timing, or seasonal storage) to prevent freeze damage and corrosion -
Provide emergency contact information for any gas line concerns or questions, with 24/5 availability during the heating season -
Recommend an annual safety inspection with pressure checks -
Walk through heater controls, thermostat operation, and how to reset safety switches if the pilot extinguishes -
Answer questions about monitoring pressure gauges, interpreting flame color, or troubleshooting performance issues -
Schedule a follow-up call one week after startup to confirm everything is operating smoothly and answer any questions that arose during initial use
Common Questions
Frequently Asked Questions About Pool & Spa Heater Connections
A gas connection delivers natural gas or propane from your utility service line (or an on-site propane tank) to your pool or spa heater. The connection includes the gas line, shutoff valve, pressure regulation equipment, and all fittings required to safely and efficiently transfer gas to the heater's burner. Proper sizing and installation are critical — an undersized line starves the heater of fuel, while improper fitting can create safety hazards.
In British Columbia, pool and spa heater installations typically require a Technical Safety BC permit if the heater is new, if the gas line is extended more than a certain distance, or if the work involves modifications to the main service regulator. Our team determines whether a permit is needed during the initial assessment and handles all applications and coordination with Technical Safety BC directly.
A straightforward connection on an existing service line usually takes one to two days. If gas service needs to be extended from the main line or if permits are required, the project may span several weeks to accommodate inspections and utility coordination. We provide a detailed timeline in writing after the design phase, so you know exactly when to expect the work.
Yes. Our Certified Gas Contractors are equipped to design and install connections for both natural gas (from the utility) and propane (from an on-site tank). The principles are similar, but the equipment and pressure ratings differ. We confirm which fuel your heater uses and design the connection and regulator accordingly.
Spa (hot tub) heaters typically operate at higher temperatures and may require different gas pressures or burner configurations than pool heaters. Some spas also use propane tanks instead of utility gas. During assessment, we identify your specific equipment and confirm the connection specifications with the heater manufacturer. The installation process is nearly identical; the engineering details change based on your system.
Most residential pool and spa heaters operate at 4 to 7 inches of water column (IWC) pressure, regulated down from the utility line (which typically delivers 15 to 30 PSI). Commercial or larger heaters may operate at higher pressures. Our design phase calculates the exact regulator setting your heater needs and confirms it during commissioning.
Yes, when done correctly. Underground gas lines must be protected from damage and water intrusion, typically using rigid metal tubing, polyethylene sleeves, or in-conduit installation. We follow Technical Safety BC standards for burial depth, marker placement, and material selection. Before any digging, we coordinate with utility locating services to confirm no existing lines are in the path.
A gas leak is a serious safety issue. If you ever smell gas (a sharp, chemical odor added to natural gas for safety), leave the area immediately, do not use electrical switches, and call FortisBC's emergency gas line: 1-800-663-9911. From outside the building, call your local fire department or 911. Our pressure-testing ensures your new connection is leak-free before operation, and we provide documentation to verify this.
Yes. Many pool owners drain or close their systems seasonally. We can show you how to properly isolate the heater side of the connection and whether you need to drain the line or leave it pressurized (depends on your climate and local codes). Improper winterization can crack fittings or cause corrosion, so we walk you through the procedure specific to your system.
Yes. We recommend an annual safety inspection with pressure checks. A regular inspection catches small issues before they become big problems and keeps your heating system running efficiently all season.
Absolutely. Old connections may be undersized for a new heater, use outdated materials, or not meet current code. We design and install a new connection to match your upgraded equipment and confirm it meets current Technical Safety BC standards. We handle disconnection of the old line, proper capping, and full commissioning of the new one.
Related Services
Explore Our Full Range of Gas-Fitting & Heating Services
Gas Line Installation & Replacement
New gas lines for appliances, fireplaces, or heating systems, sized and installed to code.
Appliance Connections
Professional connections for gas ranges, dryers, water heaters, and other household appliances.
Leak Detection & Inspection
Electronic leak detection and comprehensive system inspection to ensure your gas lines are safe.
Furnace Installation & Service
Full-service furnace heating: installation, repair, and seasonal maintenance to keep your home warm all winter.
Heat Pump Services
Energy-efficient heating and cooling with ducted or ductless heat pumps, plus ongoing service and maintenance.
Indoor Air Quality
Improve your home’s air with filtration, UV lights, and humidity control to complement your heating system.
Service Areas
Pool & Spa Heater Connections Across Northern British Columbia
Elevated HVAC & Gasfitting proudly serves Prince George and the surrounding communities with professional pool and spa heater gas connections. We’re experienced with the climate challenges and utility coordination of northern BC, and we handle every project with the same precision and care wherever you are.
Additional Communities Served
Don't see your community listed? Reach out and we'll let you know if we can get to you.
Prince George, BC
Our home base and largest service area. Fast, local response from our Prince George office on Ongman Rd.
Terrace, BC
Coastal BC community with seasonal pool use. We handle new installations and seasonal maintenance prep.
Prince Rupert, BC
Extreme weather and high humidity demand robust gas connections. We design for durability in this region.
Kitimat, BC
Industrial and residential pool systems alike. We’re familiar with the local utility coordination process.
Burns Lake, BC
Highway 16 corridor community. We cover residential and resort pool heating projects in this area.
Vanderhoof, BC
Small-town service with big-city expertise. Quick response times and straightforward communication with property owners.
Specials & Coupons
Giving back to the community
We're proud to offer discounts to the people who serve our community.
First Responder & Senior Discount
A discount on service for active first responders and seniors.
Cannot be combined with any other offer.
Schedule Service
Customer Reviews
Read ReviewsSee What Our Prince George Neighbors Are Saying
We've built our reputation one job at a time across Prince George and the surrounding Northern BC communities. Read what real customers have to say about working with our team, and check out our current rating on Google.
Ready When You Are
Ready to Heat Your Pool or Spa the Right Way?
Your pool and spa heating system is a significant investment in year-round comfort and enjoyment. A professionally installed gas connection ensures your heater operates safely, efficiently, and reliably for years to come. Our Certified Gas Contractors have the expertise, credentials, and commitment to quality that every heating project deserves.
Don’t settle for shortcuts or amateur installations. Work with a team that lives and works in Prince George, understands BC gas codes, and stands behind every connection we make. From assessment to commissioning, we’ll keep you informed and answer every question along the way.
Whether you’re adding a heater to an existing pool, upgrading an old connection to match newer equipment, or winterizing your system for seasonal closure, Elevated HVAC & Gasfitting will design a solution built to perform in northern BC’s climate. We serve Prince George, Terrace, Prince Rupert, Kitimat, Burns Lake, and Vanderhoof—wherever you are, we’re ready to help.
Family-Owned & Operated
Fortis BC Trade Ally Network
Journeyman Sheet Metal Worker
Certified Gas Contractor
15+ Years of Experience
Satisfaction guaranteed
